PIC18F25K22 MCU CRACK

PIC18F25K22 MCU CRACK,microchip chip decrypt, chip code

extraction, pic chip crack, pic chip clone, microchip chip

products clone.PCB cLone.
High Performance RISC CPU:
C Compiler optimized architecture/instruction set
Data EEPROM to 1024 bytes
Linear program memory addressing to 64 Kbytes
Linear data memory addressing to 4 Kbytes
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 Single-Cycle Hardware MultiplierExtreme Low-Power

Managementwith nanoWatt XLP™:
Sleep mode: 100 nA, typical
Watchdog Timer: 500 nA, typical
Timer1 Oscillator: 500 nA @ typical 32 kHzFlexible Oscillator

Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated

to ± 1%- Software selectable frequencies range of31 kHz to 16

MHz- 64 MHz performance available using PLL –no external

components required
Four Crystal modes up to 64 MHz
Two external Clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral

clockstops
Two-Speed Oscillator Start-upSpecial Microcontroller Features:
Full 5.5V operation (PIC18F2XK22/4XK22)
Low voltage option available for 1.8V-3.6V operation

(PIC18LF2XK22/4XK22)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT)and Oscillator Start

-up Timer (OST)
Programmable Brown-out Reset (BOR)
Extended Watchdog Timer (WDT) with on-chiposcillator and

software enable
Programmable code protection
In-Circuit Serial Programming™ (ICSP™) viatwo pins
In-Circuit Debug via two pinsAnalog Features:
Analog-to-Digital Converter (ADC) module:- 10-bit resolution- 17

analog input channels (PIC18F/LF2XK22)- 28 analog input channels

(PIC18F/LF4XK22)- Auto acquisition capability- Conversion

available during Sleep
Programmable High/Low Voltage Detection(PLVD) module
Charge Time Measurement Unit (CTMU) formTouch™ support:- Up to

28 channels for button, sensor or sliderinput
Analog comparator module with:- Two rail-to-rail analog

comparators- Comparator inputs and outputs externallyaccessible

and configurable
Voltage reference module with:- Programmable On-chip Voltage

Reference(CVREF) module (% of VDD)- Selectable on-chip fixed

voltage referencePeripheral Features:
24/35 I/O pins and 1 input-only pin:- High current sink/source

25 mA/25 mA- Individually programmable weak pull-ups-

Individually programmable interrupt-on-pinchange
Three external interrupt pins
Up to seven Timer modules:- Up to four 16-bit timers/counters

with prescaler- Up to three 8-bit timers/counters- Dedicated,

low-power Timer1 oscillator
Up to two Capture/Compare/PWM (CCP) modules
Up to three Enhanced Capture/Compare/PWM(ECCP) modules with:-

One, two or four PWM outputs- Selectable polarity- Programmable

dead time- Auto-shutdown and Auto-restart- PWM output steering

control
Two Master Synchronous Serial Port (MSSP)modules with two modes

of operation:- 3-wire SPI (supports all 4 SPI modes)- I2C™

Master and Slave modes (Slave modewith address masking)
Two Enhanced Universal Synchronous AsynchronousReceiver

Transmitter modules (EUSART):- Supports RS-232, RS-485 and LIN

2.0- Auto-Baud Detect- Auto Wake-up on Start bit

PIC18F45K20 MCU CRACK,microchip chip decrypt

PIC18F45K20 MCU CRACK,microchip chip decrypt, chip code

extraction, pic chip crack, pic chip clone, microchip chip

products clone.PCB cLone.
High Performance RISC CPU:
C Compiler Optimized Architecture:- Optional extended

instruction set designed tooptimize re-entrant code
Up to 1024 bytes Data EEPROM
Up to 64 Kbytes Linear program memoryaddressing
Up to 3936 bytes Linear data memory addressing
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 single-cycle hardware multiplierFlexible Oscillator

Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated

to ± 1%- Software selectable frequencies range of31 kHz to 16

MHz- 64 MHz performance available using PLL –no external

components required
Four crystal modes up to 64 MHz
Two external clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral

clockstops- Two-Speed Oscillator Start-upSpecial Microcontroller

Features:
Operating Voltage Range: 1.8V to 3.6V
Self-Programmable under Software Control
Programmable 16-Level High/Low-VoltageDetection (HLVD) module:-

Interrupt on High/Low-Voltage Detection
Programmable Brown-out Reset (BOR):- With software enable option
Extended Watchdog Timer (WDT):- Programmable period from 4 ms to

131s
Single-Supply 3V In-Circuit SerialProgramming™ (ICSP™) via two

pins
In-Circuit Debug (ICD) via Two PinsExtreme Low-Power

Managementwith nanoWatt XLP™:
Sleep mode: 100 nA
Watchdog Timer: 500 nA
Timer1 Oscillator: 500 nA @ 32 kHzAnalog Features:
Analog-to-Digital Converter (ADC) module :- 10-bit resolution,

13 External Channels- Auto-acquisition capability- Conversion

available during Sleep- 1.2V Fixed Voltage Reference (FVR)

channel- Independent input multiplexing
Analog Comparator module:- Two rail-to-rail analog comparators-

Independent input multiplexing
Voltage Reference (CVREF) module- Programmable (% VDD), 16

steps- Two 16-level voltage ranges using VREF pinsPeripheral

Highlights:
Up to 35 I/O pins plus 1 input-only pin:- High-Current

Sink/Source 25 mA/25 mA- Three programmable external interrupts-

Four programmable interrupt-on-change- Eight programmable weak

pull-ups- Programmable slew rate
Capture/Compare/PWM (CCP) module
Enhanced CCP (ECCP) module:- One, two or four PWM outputs-

Selectable polarity- Programmable dead time- Auto-Shutdown and

Auto-Restart
Master Synchronous Serial Port (MSSP) module- 3-wire SPI

(supports all 4 modes)- I2C™ Master and Slave modes with

addressmask
Enhanced Universal Synchronous AsynchronousReceiver Transmitter

(EUSART) module:- Supports RS-485, RS-232 and LIN- RS-232

operation using internal oscillator- Auto-Wake-up on Break-

Auto-Baud Detect

PIC18F44K20 MCU CRACK

PIC18F44K20 MCU CRACK,microchip chip decrypt, chip code

extraction, pic chip crack, pic chip clone, microchip chip

products clone.PCB cLone.
The PIC18F2XK20/4XK20 family offers the advantages of all PIC18

microcontrollers – namely, high computational performance at an

economical price – with the addition of high-endurance, Flash

program memory. On top of these features, the PIC18F2XK20/4XK20

family introduces design enhancements that make these

microcontrollers a logical choice for many highperformance,

power sensitive applications.

SuperPro 5000E Universal IC Chip Device Programmer

SuperPro 5000E Universal IC Chip Device Programmer
SKU     SP5KE
Weight     7.00 lbs
Number of Devices Supported     71,000+
Number of Manufacturers Supported     277
Number of Pins Available     144
Stand-Alone (PC-Free)     Yes
Built-in Processor     ARM7 RISC MCU
Free User Requested Device Update     No
Windows Support     Win XP/Vista/7 32/64 bit
RoHS & CE Compliance     Yes
Warranty     2 Years


 Highlights

    Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
        Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
        Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
        A CF (compact flash) card stores the project files.
    Ultra-Fast Programming Speed: Programs and verifies 64 Mb NOR Flash memory in 11.3 seconds.
    Built-in 144 universal pin drivers
    CE and RoHS Compliant


 Expanded Features

    Programs devices with Vcc as low as 1.2V.
    Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds.
    Built with 144 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins.
    The programmer operates in either PC hosted mode or stand-alone mode.
        Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
        Under stand-alone mode, the user controls the programmer via
        20-characters, 4-line LCD display with 6-KEY
        A CF (compact flash) card stores the project files. 
    ISP/ICP programming capability through optional ISP/ICP adapter.
    In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
    Over-current and over-voltage protection for safety of the chip and programmer hardware.
    Compatible with Windows 7 & Vista & XP 32/64 bit
    Only IC manufacturer approved programming algorithms provide high reliability.
    Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
    Includes the following advanced and powerful software functions:
        Chip operation starts immediately upon proper chip insertion in Production Mode.
        Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
        Password protection provides security for project files and production volume control.
        Batch command combines device operations like program, verify, security into a single command at any sequence.
        Serial number generators are available as standard or customer-specific functions.
        Log file provides production quality tracking.
        CE and RoHS Compliant


Hardware & Electrical Specifications

    Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
    Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP
    PC interface: USB2.0 (High speed)
    Stand-alone memory: Compact FLASH Card
    Power supply: AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
    Main unit: Dimensions 148(L) * 216(W) * 94(h) mm; Weight 3.5 lbs (1.6 Kg)
    Package: Dimensions 301(L) * 252(W) * 145(H) mm; Weight 6.2 lbs (2.8Kg)



Items Included

    SuperPro 5000E Programmer with a DIP48 Adapter
    AC adapter
    Software CD
    USB Cable

Optional Accessories:

    Socket Adapters in various packages
    CF card for stand-alone operation
    ISP Header for serial programming

Hardware & electrical Specifications of Xeltek 6000 Programmer

Hardware & electrical Specifications

    Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
    Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP.
    PC interface: USB2.0 (High speed)
    Stand-alone Feature: Supported, Compact FLASH Card
    Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V / 2A
    Main unit: Dimensions 148(L) * 216(W) * 94(h) mm; Weight 3.5 lbs (1.6 Kg)
    Package: Dimensions 301(L) * 252(W) * 145(H) mm; Weight 6.2 lbs (2.8Kg)

Expanded Features of Xeltek SuperPro 6000 Universal Programmer

Expanded Features

    Support devices with Vcc from 1.2V - 5V.
    30% faster programming speed compared to SuperPro5000 with ARM9 MCU Processor + Linux ultra-fast algorithm processing engine.
    Support files up to 256 GBytes.
    Built with 144 universal pin-drivers. Universal adapters are available for various package types up to 144 pins. More efficient for new device support. 
    Stand-alone mode (No PC required) and PC hosted mode.
        Under PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip.
        Under stand-alone mode, the programmer is controlled via the 6-KEY keypad and the 20 character by 4 line LCD display.
        A CF (compact flash) card is used to store the project files. 
    Cluster 1-15 units for flexible volume production. Operate multiple units to construct a concurrent multi-programming system.
    ISP / ICP programming capability available via ISP / ICP adapter.
    Over-current and over-voltage protection for safety of the chip and programmer hardware.
    Compatible with Windows XP / Vista / 7 32/64 bit
    Only IC manufacturer approved programming algorithms used for high reliability.
    Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
    Advanced and powerful software functions:
        Production mode start chip operation the moment the chip is inserted properly.
        Project function simplifies processes such as Device Selection, File Loading, Device Configuration Setting, Program Option, and Batch File Setting into one step.
        Password for project files can be set for volume production control
        Batch command combines device operations like Program, Verify,and Security into a single command at any sequence.
        Serial numbers generators are available as standard or customer-specific functions.
        Log file is useful for quality tracking.

EPROM and Flash memory ID detection and Search

LabTool-48UXP Programmer  Device insertion and contact checks--

No mistakes!

    The LabTool-48UXP performs device insertion and contact

checks before it programs each device. It can detect poor pin

contact and devices inserted upside down or in the wrong

position. This function protects your pocketbook by preventing

expensive chip damage due to operator error.




LabTool-48UXP Programmer EPROM and Flash memory ID detection and

Search

    Many EPROM and Flash memories have a build-in device ID and

manufacturer ID. The LabTool-48UXP can read the device's ID by

press hot key to detect the ID and compare its database and

determined the chip's correct vendor and product number. This

feature is especially useful with secondhand chips and devices

that have had their part number accidentally (or intentionally)

removed (this function only applied to 28 pin or 32 pin EPROM

and Flash).